TEL : +81 48 254 1744

Miter Gears

Miter gear – changes transmission direction only

Miter gears are one type of bevel gears where the two rotational axes intersect. When speaking of narrow definition of bevel gears with ability to increase or decrease speed, miter gears do not have that ability due to the pair’s same number of teeth. Their purpose is limited to the change in transmission direction. Because they are a type of bevel gears, the basic characteristic of bevel gears exist such as presence of gear forms of straight cut, spiral cut and zerol types.

Also, because the shafts can be set to any angle, there are miter gears with non-90 degree (non-perpendicular) angle called angular miter gears. KHK is capable of producing angular miter gears with shaft angles in the range of 45 to 120 degrees.

Because a pair of straight tooth miter gears has the same number of teeth, with the exception of minor differences such as set screw holes and key ways, the same two gears can mate with each other. However, in the case of spiral miter gears, even when the number of teeth are the same, the twisting directions are different. Therefore, the same gear cannot be meshed together, and it is necessary to pair the right and left handed pairs.

Also, to produce straight tooth miter gears. KHK utilizes Coniflex made by Gleason Company that allows the use of crowning method as in making bevel gears which creates final products superior in quietness.

Incidentally, originally the hat worn by Catholic bishop is called mitre and in woodworking the word miter joint is used.

Please enter part number here for a price and a drawing of the gear

NOTICE: Use of CAD Drawings
The tooth profile detailed in the CAD drawing differs from that of the actual gear.
Also, please note that the details of any chamfer, fillet, or slotted groove on the CAD drawing may differ from the true values or shape on the actual product.

Technical Information of Miter Gears

With this technical data you can view comprehensive information regarding KHK gears such as their features and advice and warnings when selecting and using them.

MMSGQ MiterGears

MMSGQ

Ground Spiral Miter Gears

Module : 2 – 4
Material : SCM415
Hardening : Curburized NOTE 1
Tooth finish : Ground teeth
Grade : JIS 0 (Please see details on PDF)

Gears that have been hardened and ground that has grade-0 accuracy, strength, abrasion resistance and quietness. Secondary operations can be given except for the teeth.

Click Here to Select Miter Gears
MMSG_MiterGears

MMSG

Ground Spiral Miter Gears

Module : 2 – 4
Material : SCM415
Hardening : Curburized NOTE 1
Tooth finish : Ground teeth
Grade : JIS 1 (Please see details on PDF)

Gears that have been hardened and ground that has excellent accuracy, strength and abrasion resistance. Secondary operations can be given except for the teeth.

Click Here to Select Miter Gears
SMSG_MiterGears

SMSG

Ground Spiral Miter Gears

Module : 1 – 5
Material : S45C
Hardening : Gear teeth induction hardened
Tooth finish : Ground teeth
Grade : JIS 2 (Please see details on PDF)

Gears that have been hardened and ground that has excellent abrasion resistance. Secondary operations can be given except for the teeth.

Click Here to Select Miter Gears
MMSA MMSB_MiterGears

MMSA / MMSB

Finished Bore Spiral Miter Gears

Module : 1 – 10
Material : SCM415
Hardening : Curburized
Tooth finish : Cut (non Ground)
Grade : JIS 4

Gears that have been fully hardened that have excellent strength and wear resistance. Can be used in the finished shape.

Click Here to Select Miter Gears
MMS_MiterGears

MMS

Spiral Miter Gears

Module : 2 – 5
Material : SCM415
Hardening : Curburized NOTE 1
Tooth finish : Cut (non Ground)
Grade : JIS 4

Gears that have been hardened that have excellent strength and wear resistance. Secondary operations are possible except for the teeth.

Click Here to Select Miter Gears
SMS_MiterGears

SMS

Spiral Miter Gears

Module : 1 – 8
Material : S45C
Hardening : Gear teeth induction hardened
Tooth finish : Cut (non Ground)
Grade : JIS 4 (Please see details on PDF)

Gears that have been hardened with excellent wear resistance. Secondary operations are possible except for the teeth.

Click Here to Select Miter Gears
SMA SMB SMC_MiterGears2

SMA / SMB / SMC

Finished Bore Miter Gears

Module : 1 – 5
Material : S45C
Hardening : Gear teeth induction hardened
Tooth finish : Cut (non Ground)
Grade : JIS 4

Gears that have been hardened with excellent wear resistance. Can be used in the finished shape.

Click Here to Select Miter Gears
MM_miter_gears

MM

Curburized/Hardened Miter Gears

Module : 2 – 5
Material : SCM415
Hardening : Curburized NOTE 1
Tooth finish : Cut (non Ground)
Grade : JIS 4 (Please see details on PDF)

Gears that have been hardened that have excellent strength and wear resistance. Secondary operations are possible except for the teeth.

Click Here to Select Miter Gears
LM_MiterGears

LM

Sintered Metal Miter Gears

Module : 0.8 – 1.5
Material : SMF5040
Hardening : None
Tooth finish : Sintered
Grade : JIS 5

Small gears made through sintering.

Click Here to Select Miter Gears
SM_MiterGears

SM

Steel Miter Gears

Module : 1 – 8
Material : S45C
Hardening : None
Tooth finish : Cut (non Ground)
Grade : JIS 3 (Please see details on PDF)

Many lineups are available. The teeth can be additionally hardened.

Click Here to Select Miter Gears
SAM_MiterGears

SAM

Angular Miter Gears

Module : 1.5 – 3
Material : S45C
Hardening : None
Tooth finish : Cut (non Ground)
Grade : JIS 3

3 types of angular miter are available for shafts at 45°, 60° and 120°.

Click Here to Select Miter Gears
SUM_MiterGears

SUM

Stainless Steel Miter Gears

Module : 1 – 4
Material : SUS303
Hardening : None
Tooth finish : Cut (non Ground)
Grade : JIS 3

Stainless steel gears with rust resistance.

Click Here to Select Miter Gears
SUMA_MiterGears

SUMA

Finished Bore Stainless Steel Miter Gears

Module : 1 – 4
Material : SUS303
Hardening : None
Tooth finish : Cut (non Ground)
Grade : JIS 3

Stainless steel gears with rust resistance. Keyways and tapping provided.

Click Here to Select Miter Gears
PM_MiterGears

PM

Plastic Miter Gears

Module : 1 – 4
Material : MC901
Hardening : None
Tooth finish : Cut (non Ground)
Grade : JIS 4 equivalent

Nylon gears can be used with no lubrication.

Click Here to Select Miter Gears
DM_1_MiterGears

DM

Injection Molded Miter Gears

Module : 0.5 – 1.5
Material : DURACON (R) (M90-44) NOTE 2
Hardening : None
Tooth finish : Injection Molded
Grade : JIS 6

Low-priced gears made through injection molding. Suitable for light loads.

Click Here to Select Miter Gears
BB_MiterGears

BB

Sintered Metal Bushings

KSP miter gears_MiterGears

Nissei KSP

Ground Spiral Miter Gears

Module : 1.5 – 6
Material : SCM415 (SCM420)
Hardening : Curburized NOTE 1
Tooth finish : Ground teeth
Grade : JIS 0

Gears that have been hardened and ground that has grade-0 accuracy, strength, abrasion resistance and quietness. Secondary operations can be given except for the teeth.

Click Here to Select Miter Gears

[NOTE 1] Although these are carburized products, secondary operations can be performed as the bore and the hub portions are masked during the carburization. However, note that high hardness (HRC40 at maximum) occurs in some cases.
[NOTE 2] "Duracon (R)" is a registered trademark of Polyplastics Co., Ltd. in Japan as well as other countries.

Related links :
Bevel Gears– Main page of bevel gears
Equivalent tables of each standard relating to raw materials and precision grades of gears

Go to Top